WELCOME!

Welcome to my Custom Fountain Pen website/blog. I put this site together a while ago so that I could let some of my fellow pen enthusiasts and penmakers, as well as my customers, see what I have been up to lately in the workshop. I don't publish all of my pens here, but good percentage of them.

A Little About My Pens: I love doing fine work on the lathe, which is what got me into this work. That is, I enjoy the focus on the details of a project - the material and colour selection, the form, the fit and finish of the pen. I also test all of the my nibs before shipping. I fill the converter, run ink through the nib and feed, and write with it. I spend a significant amount of time smoothing and adjusting the nib of every pen that I sell. My goal, with each pen that I make, is to create a writing piece whose fit and finish will impress you when you first pull it out of the packing, and that will serve you well as a great writer when you fill it up with your favourite ink.

Have a look at my posts to see some of the work I am doing lately, or see my pricing guide in the link below to the right, or check the link to my current inventory of already-made pens (usually small, as most of my work is by commissions/orders).

Or, if you are interested, you can see some of the work I have done previously in my Custom Pen Gallery on Photobucket!

If you have a Twitter account, I am @drgoretex

If any of my posts generate particular interest, I will pin them as links on the right (eg 'Basic Nib Adjusting 101').

* ORDERS: Please contact me at kencavers@gmail.com to place an order.

* PRICES: Please see the link on the right side of the screen 'Pricing Guide' for an idea as to the cost of a pen.

* REVIEWS: Have a look at the bottom of this page for some reviews done by previous buyers!

* HOW LONG WILL MY ORDER TAKE?:
IMPORTANT NOTICE: I am happily overwhelmed with pen orders. This gives me great joy in that my work is so well received, but saddens me that I cannot fill orders anywhere near as quickly as I would like. I am still trying to work through back orders, but if you have ordered from me and heard nothing for some time, feel free to email me and ask how things are going.
I still only make these pens in my spare time, when work and family time permit, and even then the productivity slows down during the coldest winter months thanks to my unheated workshop.
Given that I make these pens primarily as a hobby, I also reserve the right to pursue some other interesting pen projects in between filling orders.
I apologize for long delays in order fulfillment, which may in some case be over a year and a half. In the meantime, you are welcome to contact me to inquire about new pen orders, or to check up on a previously submitted order.

-Ken Cavers








Tuesday 27 August 2013

True Bamboo: Yep, Finally Did It.



Well, after making so many 'Bamboo' style pens, and then working on one made of bamboo 'wood', it was really kind of inevitable that I would eventually make one of these.



When I first saw one of Sailor's 'Susutake' pens some time ago, I knew that I would eventually have to have a go at a real bamboo pen.  This is only a first attempt, of course, and while I am pretty happy with the result, there are a few things I would do differently next time.  For instance, the bamboo stalk I used here was simply 'what I could find', not having a great source for bamboo around Manitoba.  It is a bit thicker than I would have preferred, and I think I will do the end jewels a bit differently next time.  I am pretty happy with the combination of blonde cane and green thread wrap, though I might try to find some darker cane and do a wrap with burgundy or chestnut thread on the next one.




The pen is sealed and stabilized inside and out with low viscosity CA, and is finished with Tru-Oil varnish.  It is fitted with an 18 K fine nib.



Thanks for looking!
Posted by at

2 comments:

  1. Unknown27 August 2013 at 13:57

    Gorgeous pen Ken :-)

    I'd be curious to know if over time the Bamboo splits. It's a common thing to happen with Bamboo due to humidity and changes in the atmosphere.

    I've had that happen with a few bamboo things, that's often why Japanese Shakuhachi flutes tend to have reinforcements wrapped along the body.

    I tip my hat to thee kind sir.

    ReplyDelete
    Replies
    1. kcavers27 August 2013 at 16:11

      Thanks very much, Michel! I am hoping that the combination of the thread ferrule wrap and the stabilizing soak of the inside with thin cyanoacrylate will prevent splits. I guess time will tell...

      Delete

Subscribe to: Post Comments (Atom)