WELCOME!

Welcome to my Custom Fountain Pen website/blog. I put this site together a while ago so that I could let some of my fellow pen enthusiasts and penmakers, as well as my customers, see what I have been up to lately in the workshop. I don't publish all of my pens here, but good percentage of them.

A Little About My Pens: I love doing fine work on the lathe, which is what got me into this work. That is, I enjoy the focus on the details of a project - the material and colour selection, the form, the fit and finish of the pen. I also test all of the my nibs before shipping. I fill the converter, run ink through the nib and feed, and write with it. I spend a significant amount of time smoothing and adjusting the nib of every pen that I sell. My goal, with each pen that I make, is to create a writing piece whose fit and finish will impress you when you first pull it out of the packing, and that will serve you well as a great writer when you fill it up with your favourite ink.

Have a look at my posts to see some of the work I am doing lately, or see my pricing guide in the link below to the right, or check the link to my current inventory of already-made pens (usually small, as most of my work is by commissions/orders).

Or, if you are interested, you can see some of the work I have done previously in my Custom Pen Gallery on Photobucket!

If you have a Twitter account, I am @drgoretex

If any of my posts generate particular interest, I will pin them as links on the right (eg 'Basic Nib Adjusting 101').

* ORDERS: Please contact me at kencavers@gmail.com to place an order.

* PRICES: Please see the link on the right side of the screen 'Pricing Guide' for an idea as to the cost of a pen.

* REVIEWS:
Have a look at the bottom of this page for some reviews done by previous buyers!

* HOW LONG WILL MY ORDER TAKE?:

IMPORTANT NOTICE: I am happily overwhelmed with pen orders. This gives me great joy in that my work is so well received, but saddens me that I cannot fill orders anywhere near as quickly as I would like. I am still trying to work through back orders, but if you have ordered from me and heard nothing for some time, feel free to email me and ask how things are going.
I still only make these pens in my spare time, when work and family time permit, and even then the productivity slows down during the coldest winter months thanks to my unheated workshop.
Given that I make these pens primarily as a hobby, I also reserve the right to pursue some other interesting pen projects in between filling orders.
I apologize for long delays in order fulfillment, which may in some case be over a year and a half. In the meantime, you are welcome to contact me to inquire about new pen orders, or to check up on a previously submitted order.

-Ken Cavers








Saturday 30 November 2013

Red, White and Black 'Shirt Pocket Fountain Pen'



OK, so here is another example of turning a disaster into an opportunity (something I am a big believer in - at least in pen making...).   A couple of weeks ago, I was turning the nib section on this pen, but it was for one of my larger longer pens, and I accidentally turned the nib section too short.  Well, that wasn't going to work, so I had to start all over again and make a longer nib section.  But before I did that, I figured I would finish the foreshortened nib section that this one had become, and then put it aside.

Well it then occurred to me that I generally use shorter nib sections in my 'Shirt Pocket Fountain Pens' (SPFP), so this became an opportunity to turn some acrylic that I had long been wanting to have a go at.

So, here it is - the red, black and white swirl acrylic, framed in black, as one of my favourite styles - the SPFP, which is the ultimate in practical for those who carry their pens (as I do) in their shirt pockets.  It is a perfect length to sit in the shirt pocket, and it posts deeply to a comfortable writing length.





This pen is fitted with a medium polished steel JoWo nib, as well as a converter for filling.

Yep, good fun.

Ken

No comments:

Post a Comment